Skip to main content
All Chemistry

Appendices to Chapter 5

Sijbren Otto - Catalysis of Diels-Alder Reactions in Water

Appendix 5.1

Critical micelle concentrations and counterion binding (β) of cetyltrimethylammonium bromide (CTAB), sodium dodecylsulfate (SDS) and cobalt, nickel, copper and zinc didodecylsulfate (M(DS)2) in pure water and under reaction conditions, as determined by conductivity measurements at 25 °Ca.

surfactantwaterunder reaction conditions
cmc (mM)β (%)cmc (mM)β (%)
CTAB0.89b81b0.8771
SDS8.14b60c7.5861
Co(DS)21.17901.0488
Ni(DS)21.19921.0990
Cu(DS)21.20891.1187
Zn(DS)21.24861.1084

a Reaction conditions: [5.2] = 1.0·10−3 M; [1-propanol] = 9.9·10−2 M; [5.1c] = 2.2·10−5 M. b Data taken from reference 12. c Data taken from reference 84.

Appendix 5.2

Assuming complete binding of the dienophile to the micelle and making use of the pseudophase model, an expression can be derived relating the observed pseudo-first-order rate constant kobs to the concentration of surfactant, [S]. Assuming a negligible contribution of the reaction in the aqueous phase to the overall rate, the second-order rate constant in the micellar pseudophase km is given by:

$$k_m = \frac{k_{obs}}{[\mathbf{5.2}]_m} \qquad (A2.1)$$

Next, [5.2]m can be expressed as a function of the partition coefficient P5.2 and the concentration of surfactant in the equations:

$$P_{\mathbf{5.2}} = \frac{[\mathbf{5.2}]_m}{[\mathbf{5.2}]_w} \qquad (A2.2)$$

$$[\mathbf{5.2}]_w = \frac{n_{\mathbf{5.2},w}}{V_w} = \frac{n_{\mathbf{5.2},t} - n_{\mathbf{5.2},m}}{V_w} = \frac{n_{\mathbf{5.2},t} - [\mathbf{5.2}]_m \cdot V_m}{V_w} \qquad (A2.3)$$

Where n5.2,w, n5.2,m and n5.2,t are, respectively, the number of moles of 5.2 in the aqueous phase, the micellar phase and the total of the two. Vw and Vm are the volumes of the aqueous phase and the micellar pseudophase.

Substitution of A2.2 in A2.3 and solving for 1/[5.2]m gives:

$$\frac{1}{[\mathbf{5.2}]_m} = \frac{V_w}{P_{\mathbf{5.2}} \cdot n_{\mathbf{5.2},t}} + \frac{V_m}{n_{\mathbf{5.2},t}} \qquad (A2.4)$$

The volume of the micellar pseudophase can be estimated from the molar volume of the micellised surfactant Vmol,S:

$$V_m = ([\mathrm{S}] - \mathit{cmc}) \cdot V_t \cdot V_{mol,S} \qquad (A2.5)$$

Substituting A2.5 in A2.4 and substituting n5.2,t with [5.2]t·Vt yields:

$$\frac{1}{[\mathbf{5.2}]_m} = \frac{V_w}{P_{\mathbf{5.2}} \cdot [\mathbf{5.2}]_t \cdot V_t} + \frac{([\mathrm{S}] - \mathit{cmc}) \cdot V_{mol,S}}{[\mathbf{5.2}]_t \cdot V_t} \qquad (A2.6)$$

Combining A2.6 and A2.1 gives the final equation from which km and P5.2 can be obtained by plotting 1/kapp versus [S].

$$\frac{1}{k_{app}} = \frac{[\mathbf{5.2}]_t}{k_{obs}} = \frac{V_{mol,S}}{k_m}[\mathrm{S}] + \frac{V_w}{P_{\mathbf{5.2}} \cdot V_t \cdot k_m} - \frac{\mathit{cmc} \cdot V_{mol,S}}{k_m} \qquad (A2.7)$$

Appendix 5.3

When the dienophile does not bind to the micelle, reaction will take place exclusively in the aqueous phase so that the second-order rate constant of the reaction in the this or this (in the editors’ view) phase (kw) is directly related to the ratio of the observed pseudo-first-order rate constant and the concentration of diene that is left in this phase.

$$k_w = \frac{k_{obs}}{[\mathbf{5.2}]_w} \qquad (A3.1)$$

The partition coefficient of 5.2 (P5.2) can be expressed in terms of the concentration of 5.2 in the aqueous phase ([5.2]w), the total number of moles of 5.2 in the reaction mixture (n5.2,t = n5.2,w + n5.2,m), as well as the volumes of the aqueous phase (Vw) and the micellar phase (Vm).

$$P_{\mathbf{5.2}} = \frac{[\mathbf{5.2}]_m}{[\mathbf{5.2}]_w} = \frac{1}{[\mathbf{5.2}]_w}\left(\frac{n_{\mathbf{5.2},t}}{V_m} - \frac{[\mathbf{5.2}]_w \cdot V_w}{V_m}\right) = \frac{1}{[\mathbf{5.2}]_w} \cdot \frac{n_{\mathbf{5.2},t}}{V_m} - \frac{V_w}{V_m} \qquad (A3.2)$$

Rewriting and substitution of A2.5 and substitution of n5.2,t with [5.2]t·Vt gives:

$$\frac{1}{[\mathbf{5.2}]_w} = \frac{P_{\mathbf{5.2}} \cdot V_{mol,S}}{[\mathbf{5.2}]_t}[\mathrm{S}] - \frac{P_{\mathbf{5.2}} \cdot \mathit{cmc} \cdot V_{mol,S}}{[\mathbf{5.2}]_t} + \frac{V_w}{[\mathbf{5.2}]_t \cdot V_t} \qquad (A3.3)$$

Combining A3.1 and A3.3 and rewriting results in:

$$\frac{1}{k_{app}} = \frac{[\mathbf{5.2}]_t}{k_{obs}} = \frac{P_{\mathbf{5.2}} \cdot V_{mol,S}}{k_w}[\mathrm{S}] - \frac{P_{\mathbf{5.2}} \cdot \mathit{cmc} \cdot V_{mol,S}}{k_w} + \frac{V_w}{k_w \cdot V_t} \qquad (A3.4)$$

Using A3.4, the partition coefficient of 5.2 can be obtained from the slope of the plot of the apparent second-order rate constant versus the concentration of surfactant and the independently determined value of kw.

Acknowledgements

The 1H-NMR shift and relaxation measurements have been performed in cooperation with Prof. Dr. J. C. T. Kwak at Dalhousie University, Halifax, Canada. We gratefully acknowledge the Dutch Organisation for Scientific Research (NWO) for a travel grant to S.O. Theo Rispens is most gratefully acknowledged for the synthesis and purification of 5.5a-c.