Skip to main content
All Chemistry

4.4 Experimental section

Sijbren Otto - Catalysis of Diels-Alder Reactions in Water

Materials

(2-Pyridyl)hydrazine (Aldrich), 4-acetylpyridine (Acros), N,N,N’-trimethylethylenediamine (Aldrich), methylrhenium trioxide (Aldrich), InCl3 (Aldrich), Cu(NO3)2·3H2O (Merck), Ni(NO3)2·6H2O (Merck), Yb(OTf)3 (Fluka), Sc(OTf)3 (Fluka), 2-(aminomethyl)pyridine (Acros), benzylideneacetone (Aldrich), and chalcone (Aldrich) were of the highest purity available. Borane dimethylsulfide (2M solution in THF) was obtained from Aldrich. Methyl vinyl ketone was distilled prior to use. Cyclopentadiene was prepared from its dimer immediately before use. (R)-1-acetyl-5-isopropoxy-3-pyrrolin-2-one (4.15) has been kindly provided by Prof. H. Hiemstra (University of Amsterdam).

3-Phenyl-1-(4-pyridyl)-2-propene-1-one (4.11)

2.00 g (16.5 mmol) of 4-acetylpyridine and 0.87 g (16.5 mmol) of benzaldehyde were added to 100 ml water at 0-4 °C. The mixture was shaken thoroughly and 10 ml of a 10 % sodium hydroxide solution was added. The reaction mixture was shaken and left overnight undisturbed at 4 °C. Solid 4.11 was collected and washed extensively with water, affording 3.28 g of crude product. Crystallisation from ethanol yielded 1.45 g (6.93 mmol, 42 %) of 4.11, mp 89.0-89.2. (lit. 87-88°C19)

1H-NMR (200 MHz CDCl3) δ(ppm) = δ 7.44 (d,1H), 7.45 (m,3H), 7.65 (m,2H), 7.77 (m,2H), 7.85 (d,1H), 8.84 (m,2H).

3-Phenylpropenal (2-pyridyl)hydrazone (4.37)

0.50 g (4.6 mmol) of (2-pyridyl)hydrazine (4.36) and 0.61g (4.6 mmol) of cinnamaldehyde (4.35) were dissolved in a mixture of 5 ml of water of pH 4 (HCl) and 2 ml of ethanol. Solid 4.37 separated overnight upon standing at room temperature. Filtration and crystallisation from ethanol yielded 0.45 g (2.0 mmol, 44 %) of 4.37, mp. 182.2 - 183.6 °C.

1H-NMR (300 Mhz, CDCl3) δ(ppm) = 6.67 (m,2H); 7.02 (m,1H); 7.17 (m,2H); 7.25 (t,2H); 7.36 (d,2H); 7.52 (m,2H); 8.15 (d,1H); 8.96 (s,1H). 13C-NMR (300 MHz, CDCl3) δ(ppm) = 104.89; 113.27; 123.21; 124.17; 125.75; 126.27; 132.95; 134.01; 135.70; 139.02; 144.95; 154.06. Anal. Calcd for C14H13N3: C, 75.3; H, 5.9; N, 18.8. Found: C, 75.02; H, 6.06; N, 18.5.

1-Dimethylamino-5-phenyl-4-pentene-3-one hydrochloride (4.42·HCl)16

2.09 g (14.3 mmol) of benzylidene acetone (4.39) and 1.17 g (14.3 mmol) of dimethylamine·HCl were added to 5 ml of absolute ethanol. 0.457 g (15.2 mmol) of paraformaldehyde was added and the suspension was refluxed for 15 minutes, resulting in a clear yellow solution. Upon cooling and scratching white solid 4.42·HCl separated. Crystallisation from ethanol afforded 0.818 g (3.4 mmol, 24%) of 4.42·HCl, mp 158.4 - 158.7 °C.

1H-NMR (200 MHz, D2O) δ(ppm) = 2.80 (s,6H); 3.19 (m,2H); 3.35 (d,2H); 6.75 (d,1H); 7.40(m,3H); 7.56 (m,2H); 7.70 (d,2H). 13C-NMR (200 MHz, D2O) δ(ppm) = 42.63; 52.32; 124.70; 128.53; 128.97; 131.20; 133.59; 145.78; 199.99. Exact mass for 4.42: calc. 203.131; found 203.131.

1-(N,N-Dimethylaminoethyl)methylamino-5-phenyl-4-pentene-3-one dihydrochloride (4.44·2HCl)

1.46 g (14.3 mmol) of distilled N,N,N’-trimethylethylenediamine (bp. 116-117 °C) was added dropwise to a solution of 3.0 g of concentrated hydrochloric acid in 5 ml ethanol at 0 °C. Subsequently, 0.457 g (15.2 mmol) paraformaldehyde was added, followed by 2.09 g (14.3 mmol) of benzylideneacetone (4.39). The reaction mixture was refluxed for 15 minutes. Solid 4.44·2HCl separated upon cooling. Filtration and washing with cold absolute ethanol afforded 3.06 g (9.20 mmol, 64 %) of 4.44·2HCl, mp. 183.0-184.8 °C.

1H-NMR (200 MHz, D2O) δ(ppm) = 2.81 (s,3H); 2.85 (s,6H); 3.42 (s,4H which exchanged slowly with D); 3.57 (s,4H); 6.70 (d,1H); 7.32 (m,3H); 7.53 (m,2H); 7.59 (d,1H). 13C-NMR (200 MHz, D2O) δ(ppm) = 40.46; 43.15; 50.13; 50.69; 51.56; 125.58; 128.53; 128.94; 131.23; 133.55; 146.02; 199.74.

1-(2-Bicyclo[2.2.1]hept-5-enyl)-3-phenylpropene-1-one (4.47)

83 mg (0.25 mmol) of 4.44·2HCl was added to a solution of 0.61 g (2.5 mmol) of Cu(NO3)2·3H2O in 250 ml of water. 100 mg of cyclopentadiene (1.5 mmol) was added after which the flask was sealed carefully and stirred for 24 hours at room temperature. The resulting precipitate was filtered and dried, affording 38 mg (0.17 mmol, 68%) of 4.47, mp 49.2-49.8.

1H-NMR (200 MHz, CDCl3) δ(ppm) = 1.50 (m,3H); 1.83 (m,1H); 2.91 (s,1H); 3.26 (m, 2H); 5.81 (m,1H); 6.10 (m,1H); 6.83 (d,1H); 7.40 (m,3H); 7.58 (m,3H). 13C-NMR (500 MHz, CDCl3) δ(ppm) = 27.93; 42.81; 46.11; 49.82; 50.62; 125.26; 128.12; 128.77; 130.14; 134.61; 137.38; 137.42; 141.65; 200.06.

N-(2-pyridylmethyl)formamide (4.49)

15 g (0.32 mole) of formic acid was added dropwise to 27 g (0.26 mole) of acetic anhydride at 0 °C under a nitrogen atmosphere, after which the mixture was heated to 50-60 °C for 2 hours. The solution was cooled to 0 °C and 20 ml of anhydrous THF was added dropwise, followed by a solution of 8.22 g of 2-aminomethylpyridine (4.48) in 40 ml of THF. The reaction was followed by TLC (silicagel / methanol) and was completed after 30 min. The THF was evaporated and the remaining product was purified using bulb to bulb distillation, affording 89% of 4.49.

1H-NMR (200 MHz, CDCl3) δ(ppm) = 4.52 (d,2H); 7.20 (m,3H); 7.62 (dt,1H); 8.29 (s,1H); 8.50 (d,2H). 13C-NMR (200 MHz, CDCl3) δ(ppm) = 42.58; 122.41; 122.56; 137.34; 148.38; 155.97; 174.70. Exact mass: calcd. 136.064; found 136.065.

2-(N-methylaminomethyl)pyridine (4.50)

3.40 g (25 mmole) of 4.49 was dissolved in 80 ml of anhydrous THF at 0 °C under a nitrogen atmosphere. 37.5 ml of a 2M solution of borane dimethylsulfide complex in THF was added dropwise. After the vigorous reaction ceased, the mixture was refluxed. The reaction was monitored with TLC (silicagel / methanol) and was complete in 1.5 hours, after which the reaction mixture was cooled to 0 °C. 25 ml of methanol was added carefully and the mixture was stirred for 1 hour. Hydrogen chloride gas was led through the reaction mixture until an acidic solution was obtained (pH indicator showed a pH < 2). The mixture was refluxed gently for 1 hour. After cooling to room temperature, 50 ml of methanol was added and the solvents were evaporated. The solid residue was treated with a saturated potassium hydroxide solution in water until pH > 12. The solution was extracted three times with 50 ml of ether. The combined ether layers were dried over sodium sulfate and the solvent was evaporated. Bulb to bulb distillation of the residue afforded 2.38 g (19.5 mmol, 78%) of colourless 4.50.

1H-NMR (200 MHz, CDCl3) δ(ppm) = 2.45 (s,3H); 3.83 (s,2H); 7.11 (t,1H); 7.27 (d,1H); 7.61 (dt,1H); 8.53 (d,1H). 13C-NMR (200 MHz, CDCl3) δ(ppm) = 35.85; 56.92; 121.72; 122.08; 136.23; 149.14; 159.51.

1-(2-Pyridylmethyl)methylamino-5-phenyl-4-pentene-3-one dihydrochloride (4.51·2HCl)

0.88 g (7.2 mmol) of 4.50 was added dropwise to a solution of 1.61 g of concentrated hydrochloric acid (16.3 mmol) in 4 ml of ethanol at 0 °C. 1.05 g benzylideneacetone (7.2 mmol) was added, together with 0.23 g (10 mmol) of paraformaldehyde. The suspension was refluxed for 20 minutes, resulting in a clear yellow solution. After cooling to room temperature, 50 ml of ether was added and a yellowish oil separated. The mixture was stirred vigorously for 5 minutes and the ether layer was decanted. The washing procedure was repeated once more. The volatiles were removed in vacuo, resulting in 2.34 g (6.6 mmol, 92%) of crude solid product. Repeated crystallisation from 1-propanol afforded 0.44 g (1.25 mmol, 17%) of 4.51·2HCl as a white powder, mp 134.1-135.4.

1H-NMR (200 MHz, D2O) δ(ppm) = 2.81 (s,1H); 3.26 (t,2H); 3.47 (t,2H); 4.56 (s,2H); 6.68 (d,1H); 7.32 (m,3H); 7.55 (m,5H); 7.96 (dt, 1H); 8.56 (d,1H). 13C-NMR (200 MHz, CDCl3) δ(ppm) = 33.43; 40.49; 51.36; 57.97; 124.56; 126.70; 127.73; 128.51; 128.95; 131.23; 133.54; 143.18; 145.47; 145.90; 146.51; 199.66. Anal. Calcd for C18H22N2OCl2: C, 61.3; H, 6.30; N, 7.95; Cl, 19.9. Found: C, 60.720; H, 6.43; N, 8.18; Cl, 19.6.

2-(3-((2-Pyridylmethyl)methylamino)1-oxopropyl)-3-phenylbicyclo[2.2.1]hept-5-ene (5.54 or 4.54 (in the editors’ view))

To a solution of 1.93 g (8.00 mmol) Cu(NO3)2·3H2O in 250 ml of water in a 250 ml flask was added 2.70 g (7.67 mmol) of crude 4.51·2HCl. The solution was adjusted to pH 4.5 (NaOH) and 1.13 g (17 mmol) of cyclopentadiene was added. The flask was sealed carefully and stirred for 3 days during which the clear blue solution changed into a green suspension. The reaction was followed by drawing samples and monitoring the decrease of the absorbance of 4.51 at 300 nm. 2.50 g (8.55 mmol) of EDTA was added and the pH was adjusted to 7. The solution was saturated with NaCl and extracted four times with 250 ml of ether. The combined ether layers were dried over sodium sulfate and the solvent was evaporated, affording 1.62 g (4.68 mmol, 61%) of crude product. After purification by chromatography over silicagel eluting with a 3 : 1 ethanol - ether mixture 0.58 g (1.68 mmol, 22%) of pure 4.56 or 4.54 (in the editors’ view) was obtained as a colourless oil.

1H-NMR (200 MHz, CDCl3) δ(ppm) = 1.51 (d,1H); 1.74 (d,1H); 2.12 (s,3H); 2.57 (m,2H); 2.63 (m,2H); 2.91 (s,1H); 2.99 (m,1H); 3.10 (d,1H); 3.22 (s,1H); 3.53 (s,2H); 5.88 (m,1H); 6.29 (m,1H); 7.14 (m,1H); 7.48 (dt,1H); 8.43 (d,1H). 13C-NMR (200 MHz, CDCl3) δ(ppm) = 39.52; 42.17; 45.00; 46.31; 47.34; 48.26; 52.14; 60.32; 63.57; 121.87; 122.97; 125.81; 127.34; 128.34; 133.06; 136.31; 139.14; 144.31; 148.98; 158.96; 209.18.

2-(1-Oxoprop-2-enyl)-3-phenylbicyclo[2.2.1]hept-5-ene (4.56)

169 mg of purified 4.54 (0.488 mmol) was added to 10 ml of water. 0.55 g of paraformaldehyde was added and the mixture was adjusted to pH 1 using diluted hydrochloric acid. 2.5 ml of acetone was added and the reaction mixture was refluxed for 4 hours. Extraction with ether, followed by washing of the ether layer with brine, drying over sodium sulfate and evaporation of the volatiles, resulted in 81 mg (0.36 mmol, 74%) of crude 4.56. Chromatography over silicagel eluting with an ether / hexane (20 / 80) mixture afforded 65 mg (0.29 mmol, 59%) of 4.56. When crude 4.54 was used, the yield after chromatography was 42 %.

1H-NMR (300 MHz, CDCl3) δ(ppm) = 1.52 (d,1H); 1.81 (d,2H); 2.95 (s,1H); 3.17 (s,1H); 3.22 (d,2H); 5.62 (dd,1H); 5.88 (m,1H); 6.14 (dd,1H); 6.31 (m,1H); 6.37 (m,1H); 7.17 (m,5H). 13C-NMR (300 MHz, CDCl3) δ(ppm) = 43.10; 44.40; 45.03; 46.16; 55.98; 123.49; 125.97; 125.41; 125.99; 130.82; 132.87; 136.53; 175.01; 197.17. Exact mass: calc.224.119; found 224.120.

Kinetic measurements

Kinetic measurements were performed employing UV-vis spectroscopy (Perkin Elmer λ2, λ5 or λ12 spectrophotometer) using quartz cuvettes of 1 cm pathlength at 25 ± 0.1 °C. Second-order rate constants of the reaction of methyl vinyl ketone (4.8) with cyclopentadiene (4.6) were determined from the pseudo-first-order rate constants obtained by following the absorption of 4.6 at 253-260 nm in the presence of an excess of 4.8. Typical concentrations were: [4.8] = 18 mM and [4.6] = 0.1 mM. In order to ensure rapid dissolution of 4.6, this compound was added from a stock solution of 5.0 µl in 2.00 g of 1-propanol. In order to prevent evaporation of the extremely volatile 4.6, the cuvettes were filled almost completely and sealed carefully. The water used for the experiments with MeReO3 was degassed by purging with argon for 0.5 hours prior to the measurements. All rate constants were reproducible to within 3%.